removal of stock radio

From : yes

Q: tom do you know what the diameter of the drift punch would be off hand. i will get one made out of brass or aluminum if you have an idea what diameter id need. john arm for me and sufices to say im pretty sure he made the seal around the sector shaft leak by beating on the side of the old pitman arm while he was well sounds like he might have damaged the bearing which is letting the shaft move around which is opening up the seal. id pop by the local parts dept. and get a new roller bearing. you can take the old one out pretty easily with a long drift/punch try and use a brass drift so you dont score the bore and install a new one using a socket and an extension as a driver find a socket that matches the diameter of the bearing cage. autozone but for some reason we had pure hell getting that pitman arm to break loose and come off there. they can be tough sometimes. heat is usually much better than pounding on it. hopefully you/he put some anti-sieze on the splines when it went back on so you wont have the same headaches. .

Replies:

From : tom lawrence

what does everyone think of this new ram...besides its about time i think the beds about 21 too short... .

From : im right

happy is never the feeling i get when talking about oil companies even when prices are low. i wasnt interested in talking about oil company bend-over-demographics. i was just wondering if anyone had seen a drop in pricing regardless of their location. im sure there is a good reason why diesel is higher in puget than in dallas. ; craig c. .