need radio/antenna adapter

From : hp

Q: i have a 2004 dodge 2500 w/the cummins t-600 off-road 4x4 package. i have had the truck up to 90 mph with no vibration but the brake dust is a lot. i was a ford owner for over 25 years and i had an expendition that ford could not fix. so screw ford! took it for a 300 mile trip and played with the tire pressure a bit. found at 65 mph with 60lbs psi there is a drone but it is minimal lessens at 70mph. still have to try a couple of hose clamps on the front drive shaft. might live with it until it gets warmer. 8+ inchs forcast for tonight. roy that your first chance to plow with it denny .

Replies:

From : zoso

denny wrote 8+ inchs forcast for tonight. roy that your first chance to plow with it ya know .......... to someone passing through this could sound a little kinky... .

From : tom lawrence

i have a 2004 dodge 2500 w/the cummins t-600 off-road 4x4 package. i have had the truck up to 90 mph with no vibration but the brake dust is a lot. i was a ford owner for over 25 years and i had an expendition that ford could not fix. so screw ford! took it for a 300 mile trip and played with the tire pressure a bit. found at 65 mph with 60lbs psi there is a drone but it is minimal lessens at 70mph. still have to try a couple of hose clamps on the front drive shaft. might live with it until it gets warmer. 8+ inchs forcast for tonight. roy that your first chance to plow with it i guess if ya dont count the 4 last friday. roy denny .

From : tbone

time i installed a radio in a car a few years ago things have changed. where one plugs the regular radios antenna into the back of the radio the connectors are different. i need to obtain some adapters which will change i installed the same fm modulator in my 03 same as your 04. mount the modulator below the radio behind the center bezel. route the antenna wires behind the glove compartment to the passenger-side kick panel kick panel and door sill trim come off in one piece. find the antenna wire there and it will have the gm-style connectors and plug right into the modulator wires. .