help removing hub - what a pain

From : Annonymous

Q: ive taken the hub nut off and the bolts on the back are off. the hub seems stuck. ive tried everything except a hub puller which i dont have access to cant find one close by. ive read it can be done without the puller but how one person got behind it and tapped it off ive tried that but this hub is really stuck. i dont want to damage anything. advice please .

Replies:

From : tom lawrence

ive taken the hub nut off and the bolts on the back are off. the hub seems stuck. ive tried everything except a hub puller which i dont have access to cant find one close by. ive read it can be done without the puller but how one person got behind it and tapped it off ive tried that but this hub is really stuck. i dont want to damage anything. put the hub bolts back in leaving about 1/8 gap between the bolt head and the knuckle. turn the wheel to give yourself some clearance and strike the bolt heads hard with a hammer. when the heads bottom out back them off another 1/8 and repeat. when a hub is that stuck a hub puller will more than likely pull the hub bearing apart effectively destroying it. of course soaking the joint between hub and knuckle with good penetrating oil is always a good idea. year and model would be helpful to know as well. the 1/2 ton hub bearings tend to rust in place stronger than the 3/4 and 1-ton bearings. .