Part Search

From : sojo

Q: i saw these on a site a few years ago. dont remember where though. you drop the plow down on these and you can push it wherever you want. if i cant find them i suppose the ones for a car or truck can be made to work. roy go to plowsite.com and a few of the links there will take you to $150 plow dollys or you can go to mennards or home depot i think northerntools.com also and get a set of snowmobile dollys for $30. the edge sits down in the groove on two of the dollys perfect. on the third dolly i cut it out and put a small bottle jack on it. i bolted an old socket on the back of the a frame of the plow to receive the jack. i works perfect and i have less than $40 in it. the nice thing is that it doesnt take much room to store it and the regular plow dollys are kinda big. denny just came back from homo depot. bought a furniture dolly and a 3 wheeled dolly for the stand. ill try it later today. roy .

Replies:

From : dick puter413atyahoo com

now ask your self what would you do if you had to pay for this job what would you want the dealer to do order the harness for me it would be an easy choice solder/heat shrink/tape and be done with it. even if it was my own vehicle and i was doing the work myself id still do it that way even if chrysler was paying for it. denny .

From : nosey

short box. wy buy half a truck for the same $ as the hole thing long box .