Oil Pressure Sending Unit for a '87 Dodge Ram 100, 318 V8
From : chawk619
Q: please help!! i need step by step instruction on removing the dash and replacing my heater core. thanks .
Replies:
From : bigironram
chris thompson wrote anyone with experience with this brand or particular board will i be disappointed in the reliability of this board after having 0 trouble out of my msi for 4 or 6 years i forget when exactly i built this system http//www.apple.com/macpro/ - craig c. .
From : big al
in response to el jr64 s post. i thought everyone should know hi all. i have a 98 ram1500 4x45.9auto. this morning the brake and abs light didnt go offany ideas thanks in advance for any information. elden most of the time its the speed sensor in the rear axle housing. but as posted you may want to have the codes pulled just to be sure. just remember that the standard code reader will not pull those codes. that is correct. i went to have pads and shoes replaced on my 95 4x4 hadnt been done in ages just to see if it made any difference and the brake shop said they were fine. tried pulling up the code and no luck. he said that 99% of the time it is a rear wheel speed sensor. he ordered one and will do it on my next oil change/lube as he also does all my regular maintainence too. brakes are fine and it is not a really dangerous situation because even on emergency stops it seems to stop normally. i belive the price quote he gave me was about $35-40.00 installed. that is a good price. in most cases this will fix the problem but not always. good luck. -- if at first you dont succeed youre not cut out for skydiving . 222 338669 5dfbi.556$za5.299@nlpi068.nbdc.sbc.com in response to el jr64 s post. i thought everyone should know hi all. i have a 98 ram1500 4x45.9auto. this morning the brake and abs light didnt go offany ideas thanks in advance for any information. elden most of the time its the speed sensor in the rear axle housing. but as posted you may want to have the codes pulled just to be sure. just remember that the standard code reader will not pull those codes. that is correct. i went to have pads and shoes replaced on my 95 4x4 hadnt been done in ages just to see if it made any difference and the brake shop said they were fine. tried pulling up the code and no luck. he said that 99% of the time it is a rear wheel speed sensor. he ordered one and will do it on my next oil change/lube as he also does all my regular maintainence too. brakes are fine and it is not a really dangerous situation because even on emergency stops it seems to stop normally. i belive the price quote he gave me was about $35-40.00 installed. ed .