Dakota Door Fit
From : abby normal
Q: so here is what ive done so far. i took out the intake air valve and found that it was all crusty and carboned up also it had a rattle to it. i got a new one and put it on there and it seem to help for a little bit however the idle is much lower and much more calm. so i think i am getting closer even though it still is pulsating. it could be my imagination but it seem to have a little better takeoff power too. my wife is out now getting a map sensor and an intake air temperature sensor. i will put both of those in and see. it will be my luck that it is the throttle position sensor. any comments you may not like it but you asked.. bg i really hate guessing on these symptoms any more. unless its something really common a wrong guess can get expensive. would this not be a good time to have someone/mechanic/dealer put a scanner on it and actually diagnose the problem before throwing more parts at it it may be cheaper in the long run. no offense intended of course..... denny .
Replies:
From : abby normal
on aug 26 722 pm beryl terra...@coolbits.net wrote ask the it tech what needs to be flashed when you install a hard drive. -- you really dont know shit than do you cock breath flash cock breath when you recover from a hdd crash or failure and you are starting from fresh some thing will need to be flashed for the system to work properly again. but fuck im only an it tech what the hell do i uh must have mis-understood this one myself but im sure someone will correct me post haste.. i have been dicking with computers for at least half my life and cant recall a single time flashing anything except my middle finger at the computer when recovering the system. unless of course you consider installing an os on the new hard drive to be flashing the new os onto the system. go ahead flame on. anyway heres something i was told about a long time ago and have always wanted to try it but never have gotten around to it -- take the complete a/c system from a car and use it to cool a house. the example i was told about was for a house on the nc outer banks and supposedly used a delco a-6 compressor and an electric motor to spin it. i do not know from where the other components were sourced. i could see using a larger evaporator and condensor possibly.. anyone done this in the past sure i
From : bigironram
to use a central unit.. .
From : abby normal
tbone the aadt and sometime snoball defender speaks up. bg what exactly are you trying to say nothing and everything. take it how you wish tom. .
From : azwiley1
on sun 26 aug 2007 131834 -0400 roy roy@fhome.net wrote now that ya tasted it bro figure it is okay to tell ya that your cat had a accident. gbmfg that was why i tasted it... got to much invested in the cats to have them around leaking coolant.. i still havent found where the water is coming from and of course i loaned out my chiltons and didnt get it back before we moved.. does it rain there roy about an inch or so a year... mostly just humid in the summer.. mac please remove splinters before emailing .
From : bigironram
on sun 26 aug 2007 065407 -0700 fmb fmbb@sbcglobal.net wrote ok.. i can do that...*g* thanks! when ya coming down not this year mac. i cant say for next year yet either unless i leave my first wife at home. she doesnt have an interest yet to travel to south mexico. im workin on it though... did you find what was pluggin your drain hole fmb north mexico south mexico were in north baja like a suburb of san diego.. lol 3 hours from el centro ca... 3 1/2 from yuma az.. about 6 hours from san diego i think.. http//www.eldoradoranch.com/ mac please remove splinters before emailing .
From : abby normal
on aug 27 628 am abby.normal back....@nospam.net wrote good answer. now i am limited to the ext. cab doors only. you mentioned the power stuff swapping in/out. i take that to mean i can use either power or non-power but must stick with the ext. cab doors only. thanks for that info. now i just need to locate one which has been a monumental task to date. i am going to plan a day on the phone with bone yards when my minutes refresh. an internet presence would help but they are just not up to that yet. save yourself the time on the phone and go to www.car-parts.com .
From : bigironram
yes youve interpreted my poorly worded response correctly. you can give this site a shot http//www.junkyards.com/ someone may chime in with some better ones. good answer. now i am limited to the ext. cab doors only. you mentioned the power stuff swapping in/out. i take that to mean i can use either power or non-power but must stick with the ext. cab doors only. thanks for that info. now i just need to locate one which has been a monumental task to date. i am going to plan a day on the phone with bone yards when my minutes refresh. an internet presence would help but they are just not up to that yet. does anyone here know if a rh manual door from a 98 dakota regular cab will bolt up to an ext. cab 1998 also and the electronics mount into it from the electric door i have an electric door thats been hit and found a manual door thats real nice. i just dont know if it will work and dont want to buy it then find out. thanks abby.normal @ tx . rr .com iirc the standard cab has a rounded bottom rear corner and the extended cab has a squared off bottom rear corner. the power stuff will swap in but i dont think youll like the fit... .