ABS sensor

From : matt

Q: has anyone had to change the rear abs sensor on a 99 dak 4x4 i noticed that its seated pretty securely in the diff. and i dont want to break anything trying to remove it. is it supposed to be difficult to remove thanks in advance for any advice. matt --- outgoing mail is certified virus free. checked by avg anti-virus system http//www.grisoft.com. version 6.0.518 / virus database 316 - release date 9/11/03 .

Replies:

From : matt

thanks for the advice and quick reply. i ended up using a larger blade screwdriver to pry the sensor up and out. in hindsight pliers would have made the job slightly easier. thanks again. has anyone had to change the rear abs sensor on a 99 dak 4x4 i noticed that its seated pretty securely in the diff. and i dont want to break anything trying to remove it. is it supposed to be difficult to remove thanks in advance for any advice. havent done it on a dak but the rams are very similar. first lift up the locking tab on the electrical connector and slide the connector off. next remove the bolt that holds the metal housing over the sensor. then grab the sensor with pliers twist and pull straight out of the diff. the sensor has an o-ring around it and the fit is tight but it does come out without too much pressure. --- outgoing mail is certified virus free. checked by avg anti-virus system http//www.grisoft.com. version 6.0.518 / virus database 316 - release date 9/11/03 .