2007 Radio Bezel Removal

From : plumber

Q: i finally got the local chrysler dealer to print me out one so i dont need the complete print out but im still trying to find out if i have a limited slip rear end i cant read the tag on it. the build sheet says it is a drbp corporate 9.25 ld rear axle is this the one that needs the special grease and additive tia tom if your truck is equipped with the lsa the build sheet will indicate that. if the build sheet doesnt mention a lsa then you do not have it. mike thanks mike i dont see anything about lsa on the build sheet so i guess that means i dont need the special additive. tom all you need to do is test the rear. block the front wheels jack one of the rear wheels off of the ground put the vehicle in neutral and try and turn the rear wheel that you jacked up. if it turns easily along with the driveshaft then it is an open rear. if it will not turn or turns with extreme force then you have a limited slip. if it turns with only some difficulty then it is a somewhat worn limited slip. open rears do not need the additive. -- if at first you dont succeed youre not cut out for skydiving thanks i thought i remembered that was how you did it but it has been quite awhile since ive messed with one that might have a locking rear end so thought i better check. tr .

Replies:

From : moparman

on sep 19 451 pm moparman scott.hendryx.clot...@sbcglobal.net wrote heres some more stuff. after googling several m880s i see that all of them mention they have a 318 in them. http//www.dodgepowerwagonm880.com/dodge%20m880%20w200%20engine%20and... -- ------moparman------ tedward said eggs are really good for you. they have all the nutrition needed to make a chicken. ok thanks but i do know that the plate inside says cargo m882- w-200 dodge----so i dont no wether that the 2 instead of the 0 means anything or not.. .