2002 Dodge Ram Spark Plug Replacement

From : mmaralscott

Q: recently i had the map sensor replaced on my 1996 dodge ram. its been a couple of weeks now and i ran the ac for the first time and now notice that when i accelerate the air is being diverted from the dash vents to the defrost vents. it also does it with the heater as well. now i never noticed this occuring prior to the dealer replacing the map sensor. i also know there is an tsb 24-01-96 that describes the exact problem i appear to be having but can my problems be related to the replacement of the map sensor or during the course of replacing the map sensor they screwed up a vacuum line any help would be appreciated. thanks mark .

Replies:

From : beekeep

on mon 1 sep 2003 122924 -0500 scott shelby@ev1.net wrote can anyone shed some light on the easiest way to go about this it appears upon first inspection that this is not a typical remove & install item as with most other makes/models. i dont have a chiltons manual yet and need to get this done. any help is highly appreciated. thank you scott they have right hand threads so righty tighty; lefty loosey. beekeep .

From : budd cochran

aw darn it . . .ya beat me to it greg. budd on mon 1 sep 2003 122924 -0500 scott shelby@ev1.net wrote can anyone shed some light on the easiest way to go about this it appears upon first inspection that this is not a typical remove & install item as with most other makes/models. i dont have a chiltons manual yet and need to get this done. any help is highly appreciated. thank you scott they have right hand threads so righty tighty; lefty loosey. beekeep .

From : scott

good answer you guys...what has to be removed before i have access to the plugs i need help because i havent done it yet on this vehicle. help me if you can! on mon 01 sep 2003 183848 gmt budd cochran mr-d150spam@citlink.net wrote aw darn it . . .ya beat me to it greg. budd on mon 1 sep 2003 122924 -0500 scott shelby@ev1.net wrote can anyone shed some light on the easiest way to go about this it appears upon first inspection that this is not a typical remove & install item as with most other makes/models. i dont have a chiltons manual yet and need to get this done. any help is highly appreciated. thank you scott they have right hand threads so righty tighty; lefty loosey. beekeep .