2000 Dodge Transmission
From : dirtclod
Q: hey this dirtclod and i am at the end of the rope. i had the tps apps replaced and the mechanic said he drove it and it was fixed. i drove it six blocks and it started messing up again. i took it back and he said to have the computer re-flashed. or maybe it was the tc lock-up solenoid. what the hell is going on here someone help me!!!! .
Replies:
From : marsh monster
====== ====== dirtclod wrote hey this dirtclod and i am at the end of the rope. i had the tps apps replaced and the mechanic said he drove it and it was fixed. i drove it six blocks and it started messing up again. i took it back and he said to have the computer re-flashed. or maybe it was the tc lock-up solenoid. what the hell is going on here someone help me!!!! he said he drove it for about an hour at different speeds and it ran perfect. after i picked up the truck it started to act up. i took it back today and he told he to have the computer re-flahed at the dealership. ======== ======== sue him to get your money back for not correcting the problem he charged you for repairing. after all he said he fixed it. then........ carry it somewhere else let them diagnose it. if they charge you and say they fixed it......well.......you get the picture. or......... you could tell us exactly what the problem is with the truck. you know sos we dont have to go pulling up the very few posts youve made on usenet to figure it out for ourselves. or........ id be glad to guess......like the last dude did. okay........... unhook the batteries....... mash the brake pedal.......... clean the terminals........................ clean the posts............................................ hook everything back up........................................ go for a test drive............................................................. do a repost and post the results. g oh yeah........ no charge no warranty this was a guess...... only a guess.................... i dont charge for guesss. marsh monster takes a sip of his mushroom tea........mmmmm.....gooooood stuff .
From : dirtclod
marsh monster wrote ====== ====== dirtclod wrote hey this dirtclod and i am at the end of the rope. i had the tps apps replaced and the mechanic said he drove it and it was fixed. i drove it six blocks and it started messing up again. i took it back and he said to have the computer re-flashed. or maybe it was the tc lock-up solenoid. what the hell is going on here someone help me!!!! he said he drove it for about an hour at different speeds and it ran perfect. after i picked up the truck it started to act up. i took it back today and he told he to have the computer re-flahed at the dealership. ======== ======== sue him to get your money back for not correcting the problem he charged you for repairing. after all he said he fixed it. then........ carry it somewhere else let them diagnose it. if they charge you and say they fixed it......well.......you get the picture. or......... you could tell us exactly what the problem is with the truck. you know sos we dont have to go pulling up the very few posts youve made on usenet to figure it out for ourselves. or........ id be glad to guess......like the last dude did. okay........... unhook the batteries....... mash the brake pedal.......... clean the terminals........................ clean the posts............................................ hook everything back up........................................ go for a test drive............................................................. do a repost and post the results. g oh yeah........ no charge no warranty this was a guess...... only a guess.................... i dont charge for guesss. marsh monster takes a sip of his mushroom tea........mmmmm.....gooooood stuff you replied to my last post so i thought you understood my problem. i dont know what is wrong with it if i did i wouldnt be on this computer. when the 2000 dodge 2500 4x4 ctd with 72212 miles reaches 45-50 mph and shifts to overdrive the torque converter locks up then unlocks over and over again. at first i thought it was something wrong with the transmission so i had the fluid and filter changed. then i took it and after the transmission mechanic diagnosed the problem as the tps apps he replaced that and the problem still exists. i read that if you cycle the key three times the code will appear on the odometer. i did this and got code p-1693. i cannot find out what this code means. i am just looking for some advice. .
From : max dodge
i did this and got code p-1693. i cannot find out what this code means. i am just looking for some advice. p1693 is a diagnostic trouble code set in the companion module which means the pcm has received word from the ecm that it has a problem. in the 2000 ram w/cummins the pcm is dodge the ecm is cummins. youll have to find a dealer of either dodge or cummins to have the ecm dtcs read. i suspect itll have something to do with the apps. -- max there are four boxes to be used in defense of liberty soap ballot jury and ammo. please use in that order. -ed howdershelt author marsh monster wrote ====== ====== dirtclod wrote hey this dirtclod and i am at the end of the rope. i had the tps apps replaced and the mechanic said he drove it and it was fixed. i drove it six blocks and it started messing up again. i took it back and he said to have the computer re-flashed. or maybe it was the tc lock-up solenoid. what the hell is going on here someone help me!!!! he said he drove it for about an hour at different speeds and it ran perfect. after i picked up the truck it started to act up. i took it back today and he told he to have the computer re-flahed at the dealership. ======== ======== sue him to get your money back for not correcting the problem he charged you for repairing. after all he said he fixed it. then........ carry it somewhere else let them diagnose it. if they charge you and say they fixed it......well.......you get the picture. or......... you could tell us exactly what the problem is with the truck. you know sos we dont have to go pulling up the very few posts youve made on usenet to figure it out for ourselves. or........ id be glad to guess......like the last dude did. okay........... unhook the batteries....... mash the brake pedal.......... clean the terminals........................ clean the posts............................................ hook everything back up........................................ go for a test drive............................................................. do a repost and post the results. g oh yeah........ no charge no warranty this was a guess...... only a guess.................... i dont charge for guesss. marsh monster takes a sip of his mushroom tea........mmmmm.....gooooood stuff you replied to my last post so i thought you understood my problem. i dont know what is wrong with it if i did i wouldnt be on this computer. when the 2000 dodge 2500 4x4 ctd with 72212 miles reaches 45-50 mph and shifts to overdrive the torque converter locks up then unlocks over and over again. at first i thought it was something wrong with the transmission so i had the fluid and filter changed. then i took it and after the transmission mechanic diagnosed the problem as the tps apps he replaced that and the problem still exists. i read that if you cycle the key three times the code will appear on the odometer. i did this and got code p-1693. i cannot find out what this code means. i am just looking for some advice. .
From : tom lawrence
computer. when the 2000 dodge 2500 4x4 ctd with 72212 miles reaches 45-50 mph and shifts to overdrive the torque converter locks up then unlocks over and over again. okay.... first things first. you or your mechanic needs to determine whether or not this lock/unlock is commanded ie. called for by the pcm or not. this is best done with a drb3 which for the most part only dealership techs will have. barring that back-probe the wire going to pin #7 on the transmission solenoid connector big round connector - should be an orange/black wire but verify its #7. run the wire up to the cab and hook to a multi-meter with the other probe on a good ground. when the clutch is unlocked you should read an open circuit on the meter. when the clutch locks you should read very little resistance the pcm switches ground on this wire to activate the tcc lu solenoid. if the tcc is flapping and the meter is holding steady showing a closed circuit the problem is in the transmission. if the meter shows the fluctuations along with the tcc then the problem is electrical and the pcms reading something thats causing it to beat the tcc into submission. if its determined to be an electrical problem the next step would be to monitor the apps signal. this can be done with most any obd-ii scan tool that can provide real-time data. your mechanic should know all this though... .
From : nosey
your mechanic should know all this though... but he probably doesnt know about the wrap the ground wire on the alternator with tin foil trick. -- ken .
From : marsh monster
nosey wrote your mechanic should know all this though... but he probably doesnt know about the wrap the ground wire on the alternator with tin foil trick. -- ken ======== ======== your probably right ken. theres a lot of trannies being sold because of this symptom. marsh .
From : nosey
its no joke. go to http//www.turbodieselregister.com//index.php and scroll about half way down the page look for torque converter lock-up fix underlined in red. -- ken dirtclod wrote does this work or is it a joke. i spoke with someone at bd power about a torqloc and he said that wasnt the problem. he suggested a noise reducer for the apps. nosey wrote your mechanic should know all this though... but he probably doesnt know about the wrap the ground wire on the alternator with tin foil trick. -- ken .
From : roy
hey this dirtclod and i am at the end of the rope. i had the tps apps replaced and the mechanic said he drove it and it was fixed. i drove it six blocks and it started messing up again. i took it back and he said to have the computer re-flashed. or maybe it was the tc lock-up solenoid. what the hell is going on here someone help me!!!! you had it fixed and it was okay but now it is not take it back to the guy that fixed it and have him finish the job. i believe you can adjust the tps. roy .
From : dirtclod
roy wrote hey this dirtclod and i am at the end of the rope. i had the tps apps replaced and the mechanic said he drove it and it was fixed. i drove it six blocks and it started messing up again. i took it back and he said to have the computer re-flashed. or maybe it was the tc lock-up solenoid. what the hell is going on here someone help me!!!! you had it fixed and it was okay but now it is not take it back to the guy that fixed it and have him finish the job. i believe you can adjust the tps. roy he said he drove it for about an hour at different speeds and it ran perfect. after i picked up the truck it started to act up. i took it back today and he told he to have the computer re-flahed at the dealership. .
From : dirtclod
does this work or is it a joke. i spoke with someone at bd power about a torqloc and he said that wasnt the problem. he suggested a noise reducer for the apps. marsh monster wrote nosey wrote your mechanic should know all this though... but he probably doesnt know about the wrap the ground wire on the alternator with tin foil trick. -- ken ======== ======== your probably right ken. theres a lot of trannies being sold because of this symptom. marsh .
From : dirtclod
does this work or is it a joke. i spoke with someone at bd power about a torqloc and he said that wasnt the problem. he suggested a noise reducer for the apps. nosey wrote your mechanic should know all this though... but he probably doesnt know about the wrap the ground wire on the alternator with tin foil trick. -- ken .
From : dirtclod
does this work or is it a joke. i spoke with someone at bd power about a torqloc and he said that wasnt the problem. he suggested a noise reducer for the apps. nosey wrote your mechanic should know all this though... but he probably doesnt know about the wrap the ground wire on the alternator with tin foil trick. -- ken .