1989Ramcharger

From : merica

Q: when you switch wires does the other one quit yes it does. ive had the harneses out before. is that the only reason one wouldnt squirt. because i beleave i had the same voltage at both sides but ill have to check again. on that engine you get 12v supply to both injectors from the autoshutdown relay. first make sure you have 12v to both injectors via the dk gn/ bk tracer when you turn the key on. youll have voltage for about three seconds when you firest turn the key or when cranking the engine over. the smec fires the injectors by grounding the white and tan wires. you can check continuity from the white wire on #1 injector to the 14 pin connector at the smec position #9. the tan wire goes to position #10 in the connector. if you have voltage to the injectors and continuity from the injectors to the 14 way connector you probably have a bad smec. denny .

Replies:

From : the punisher

on the registration for my dodge 3/4ton hd ctd there is a value referred to as net weight. does anybody know what this actually means for example is it net of all fluids ie engine oil transmission oil etc also on what basis does chrysler decide the gvwr rating there is a reason for this question. so id appreciate some input. thanks .