truck-trans-dodge
truck-logo-dodge
Search Messages :  

1987 dodge ram truck pouring gas out of carb.

From : mikep28

Q: sometimes when the motor is hot and been shut off for a little period of time like runnin gin home depot. i come outside to restart it and its flooded pull the breather top and its covered in gas. this happened once last year and now twice this year. i smacked gently on the side of the carb with a 1/2 drive ratchet and it stopped. let the gas drive up and it drove fine after that. of course i dont drive this thing but maybe once a month for a trip to the lumber yard or dump. any idea here stuck float .

Replies:

From : mikep28

divmy truck has 65k miles and i am thinking it might be time to = replace the=20 shocks /div divi use the tuck mostly as a daily driver occasionally pull a 7000# = rated=20 tandem car trailer loaded with any number of assorted loads from logs = to my=20 tractor. and at times loads of gravel beauty bark etc in the bed. = although not=20 at the same time as the trailer..................../div divplease advise your recommendations on shocks./div divtiabrjoe /div/body/html ------=nextpart000008901c787ea.1260f6b0-- .

From : walt fles

on apr 26 1207 pm mikep28 mike...@insightbb.com wrote on apr 23 347 pm snoman a...@snoman.com wrote on 23 apr 2007 113704 -0700 mikep28 mike...@insightbb.com wrote any idea here stuck float i would say so replace float if it is plastic and needle seat assembly and your troubles should go away. ----------------- thesnoman.com fixed well i think. thanks for the help. i had a 1978 fury wagon with a holley 2210. i replaced the fuel filter without replacing the little rubber hoses between it and the metal fuel line. within2 weeks my car ran like yours did. i took apart the carb and checked the float it was ok and proceeded to rebuild it. when i change the needle and seat i found a speck of fuel line in the seat. 20 bucks including 2 bucks to soak the carb. .

From : snoman

on 23 apr 2007 113704 -0700 mikep28 mikep28@insightbb.com wrote any idea here stuck float i would say so replace float if it is plastic and needle seat assembly and your troubles should go away. ----------------- thesnoman.com .