- Recall 2001 Dodge Dakota -
From : winky
Q: they just said the cust would be reimbursed for the cost that was out of pocket to the effected vehicles anyone have info on what the stipulations are for re embursment of ball joint repair had mine done off warranty. the recall is for ball joints. thanks in advance happy holidays .
Replies:
From : frank k
i have a cat back dual exhaust system from rhino performance and it rusted out in two years so i want to go with a different brand without spending a fortune. 95 ram 1500 ext cab 4x4 5.9l 192k and running great. meineke muffler has a vortex system but they tell me massachusetts is now rejecting their system at inspection for noise. i would like to spend no more than $400 pass inspection and still sound a bit throaty i really dont want anything too loud . any suggestions .
From : maxpower
the obd2 connector for the scan tool that they have will not fit your vehicle all you need to do is cycle the key three times to retrive a code from the computer on off on off then on it will flash out a series of codes by blinking the engine lite flash flash pause flash flash flash pause would be a code23 it may start with a 12 and always end with a 55 here is a site that may be helpful i havent read it all yet and dont no if it supports your older system http//www.autotap.com/ auto xray also has a complete line of scanners and readers that will handle odb1 and odb2. be prepared to spend from $150 on up depending on what features you want. the drb units used by dc will run you several thousand. bruce .
From : maxpower
the 5pm on fri 10 dec 2004 190309 -0500 maxpower damnnickname@yahoo.com wrote who said this they just said the cust would be reimbursed for the cost that was out of pocket to the effected vehicles anyone have info on what the stipulations are for re embursment of ball joint repair had mine done off warranty. the recall is for ball joints. thanks in advance happy holidays .
From : winky
on fri 10 dec 2004 233220 gmt denny wddodge@woh.rr.com wrote on fri 10 dec 2004 010712 gmt denny wddodge@woh.rr.com wrote denny wrote i hate to admit it but i was/am sitting at the kitchen table. i got a ruger 345 last saturday and tried it out after work this afternoon. i was just sitting here cleaning and putting it back together. have you shot it yet 45 auto weighing only 29 ounces should be a hand full to hang onto. guess it cant be any worse than the p-11 i have at 14 ounces. jerry i ran 16 rds thru it and it really isnt bad id compare it to my p95 9mm. it sure is a whole lot less than the 500. i didnt have any problems hitting a 9 paper plate at 17 steps. i wasnt trying to shoot fast but i wasnt aiming every shot either. it has a nice feel to it. im curious to how a light on the rail will effect the recoil if itll keep the muzzle down much. denny i like to shoot at old bowling pins. my new toy is a glock g37. very fun. the bowling pins pretty much just blow up when i hit them with that. im leery of shooting at anything to do with bowling. ive been had once too many times.. bg im not familiar with the g37 what caliber is that glocks are nice shooting weapons. denny its the new glock. it is a .45 but shoots a round called the .45 gap glock automatic pistol. the round is a little shorter than the normal .45 auto but has the same ballistics or better using a higher grade of powder. glock designed the round so that the grip could be made smaller. it is the same size grip as a glock .40 now so smaller hands can get a good grip on it. the gap round is made now by most manufacturers and most comapnies are coming out with a .45 gap gun. very nice gun the grip is more comfortable but you still get the bang of the .45. love the gun. all i use anymore are glocks mostly .40 but this .45 gap is a great gun. i do have a s&w but it is a 9mm which is just too light for me but its a good practice gun for my sons. the bowling pins are fun. they make a good target at 50 yards and you get a real return when you hit one. .
From : maxpower
on fri 10 dec 2004 190309 -0500 maxpower damnnickname@yahoo.com wrote who said this they just said the cust would be reimbursed for the cost that was out of pocket to the effected vehicles anyone have info on what the stipulations are for re embursment of ball joint repair had mine done off warranty. the recall is for ball joints. thanks in advance happy holidays .
From : winky
budd cochran wrote yep lose weight. that kid was skinny!!!! but i gotta wonder if the trans am driver forgot to fill his nitrous bottle . . . even so if he needed nitrous to beat a scooter.... .